All MIBs › CPQFCA-MIB › cpqFcaPhyDrvNotReadyErrs
cpqFcaPhyDrvNotReadyErrs
Module: CPQFCA-MIB
OID (symbolic): CPQFCA-MIB::cpqFcaPhyDrvNotReadyErrs
OID (numeric): 1.3.6.1.4.1.232.16.2.5.1.1.29
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: Drive Not Ready Errors.
The number of times the physical drive failed after the spin up command was issued during the reference time (phyDrvRefTime). When the spin up command was issued, the drive failed to reach its ready state. If the current value is zero, the drive has not failed. If the current value is greater than zero, at least one failure occurred.
This error could be caused because the physical drive has failed to spin.
If you suspect a problem:
1. Check the cables connecting the drive to ensure that they are intact.
2. If the cables are properly connected, run diagnostics to verify that a problem exists.
If the value cannot be determined, 4,294,967,295 is returned.
What is cpqFcaPhyDrvNotReadyErrs?
This counter reports the number of times the physical drive failed to reach its ready state after a spin-up command was issued, during the reference time, with zero meaning the drive has never failed to spin up. An admin treats any nonzero value as a sign the drive is having trouble becoming operational and should be tested. For example, a drive showing repeated not-ready errors after routine power cycles would be a strong candidate for replacement even if it currently reports an ok status.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.16.2.5.1.1.29 snmpwalk -v2c -c public <target> CPQFCA-MIB::cpqFcaPhyDrvNotReadyErrs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.16.2.5.1.1.29.1 snmpget -v2c -c public <target> CPQFCA-MIB::cpqFcaPhyDrvNotReadyErrs.1
Start monitoring Legacy Compaq Fibre Channel Array (CPQFCA) storage controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQFCA-MIB::cpqFcaPhyDrvNotReadyErrs OID value, configure state conditions and alerts, and monitor any Legacy Compaq Fibre Channel Array (CPQFCA) storage controller from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.16 | cpqFibreArray | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2 | cpqFcaComponent | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5 | cpqFcaPhyDrv | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5.1 | cpqFcaPhyDrvTable | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5.1.1 | cpqFcaPhyDrvEntry | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5.1.1.29 | cpqFcaPhyDrvNotReadyErrs | CPQFCA-MIB |