All MIBs › CPQFCA-MIB › cpqFcaPhyDrvFunctTest3
cpqFcaPhyDrvFunctTest3
Module: CPQFCA-MIB
OID (symbolic): CPQFCA-MIB::cpqFcaPhyDrvFunctTest3
OID (numeric): 1.3.6.1.4.1.232.16.2.5.1.1.24
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: Functional Test 3.
This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical drive currently operates when performing various tasks with the way it worked when it was new.
A percent value is displayed that represents how the drive works currently when compared to how the drive worked when new. New drives operate at the 100 percent level. By default, if the current value is less than or equal to 80 percent, a problem may exist.
If you suspect a problem, run diagnostics to verify that a problem exists.
If the value cannot be determined, 4,294,967,295 is returned.
What is cpqFcaPhyDrvFunctTest3?
This gauge reports a percentage score from a third built-in functional test comparing the drive's current behavior on various tasks against its as-new baseline, with 100 percent representing new-drive performance. An admin reviews all three functional test scores together as an early-warning system for mechanical wear before the drive starts generating hard errors. For example, all three FunctTest scores trending downward in parallel would give strong confidence the drive genuinely needs replacement rather than being a one-off test anomaly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.16.2.5.1.1.24 snmpwalk -v2c -c public <target> CPQFCA-MIB::cpqFcaPhyDrvFunctTest3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.16.2.5.1.1.24.1 snmpget -v2c -c public <target> CPQFCA-MIB::cpqFcaPhyDrvFunctTest3.1
Start monitoring Legacy Compaq Fibre Channel Array (CPQFCA) storage controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQFCA-MIB::cpqFcaPhyDrvFunctTest3 OID value, configure state conditions and alerts, and monitor any Legacy Compaq Fibre Channel Array (CPQFCA) storage controller from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.16 | cpqFibreArray | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2 | cpqFcaComponent | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5 | cpqFcaPhyDrv | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5.1 | cpqFcaPhyDrvTable | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5.1.1 | cpqFcaPhyDrvEntry | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5.1.1.24 | cpqFcaPhyDrvFunctTest3 | CPQFCA-MIB |