All MIBs › CPQFCA-MIB › cpqFcaPhyDrvFunctTest2
cpqFcaPhyDrvFunctTest2
Module: CPQFCA-MIB
OID (symbolic): CPQFCA-MIB::cpqFcaPhyDrvFunctTest2
OID (numeric): 1.3.6.1.4.1.232.16.2.5.1.1.23
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: Functional Test 2.
This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical drive currently operates when performing various tasks with the way it worked when it was new.
A percent value is displayed that represents how the drive works currently when compared to how the drive worked when new. New drives operate at the 100 percent level. By default, if the current value is less than or equal to 80 percent, a problem may exist.
If you suspect a problem, run diagnostics to verify that a problem exists.
If the value cannot be determined, 4,294,967,295 is returned.
What is cpqFcaPhyDrvFunctTest2?
This gauge reports a percentage score from a second built-in functional test comparing the drive's current behavior on various tasks against its as-new baseline, with 100 percent representing new-drive performance. An admin uses it alongside cpqFcaPhyDrvFunctTest1 and FunctTest3 to build a fuller picture of a drive's mechanical health from multiple independent test angles. For example, a low FunctTest2 score paired with a normal FunctTest1 score could point to a specific subsystem within the drive degrading rather than an overall failure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.16.2.5.1.1.23 snmpwalk -v2c -c public <target> CPQFCA-MIB::cpqFcaPhyDrvFunctTest2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.16.2.5.1.1.23.1 snmpget -v2c -c public <target> CPQFCA-MIB::cpqFcaPhyDrvFunctTest2.1
Start monitoring Legacy Compaq Fibre Channel Array (CPQFCA) storage controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQFCA-MIB::cpqFcaPhyDrvFunctTest2 OID value, configure state conditions and alerts, and monitor any Legacy Compaq Fibre Channel Array (CPQFCA) storage controller from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.16 | cpqFibreArray | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2 | cpqFcaComponent | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5 | cpqFcaPhyDrv | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5.1 | cpqFcaPhyDrvTable | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5.1.1 | cpqFcaPhyDrvEntry | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5.1.1.23 | cpqFcaPhyDrvFunctTest2 | CPQFCA-MIB |