All MIBs › CPQFCA-MIB › cpqFcaOsCommonPollFreq
cpqFcaOsCommonPollFreq
Module: CPQFCA-MIB
OID (symbolic): CPQFCA-MIB::cpqFcaOsCommonPollFreq
OID (numeric): 1.3.6.1.4.1.232.16.2.1.4.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The Insight Agent's polling frequency.
The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero (0) indicates that the Insight Agent retrieves the information upon request of a management station, it does not poll the device driver at a specific interval.
If the poll frequency is zero (0) all attempts to write to this object will fail. If the poll frequency is non-zero, setting this value will change the polling frequency of the Insight Agent. Setting the poll frequency to zero (0) will always fail, an agent may also choose to fail any request to change the poll frequency to a value that would severely impact system performance.
What is cpqFcaOsCommonPollFreq?
This read-write integer sets, in seconds, how often the Insight Agent polls the Fibre Channel array device driver for fresh data, with zero meaning it only fetches data on request from a management station and rejecting writes to this object in that mode. An administrator tunes this to balance timeliness of Fibre Channel controller health data against polling overhead. Setting this to 120 would have the agent refresh Fibre Channel controller and accelerator status roughly every two minutes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.16.2.1.4.1 snmpwalk -v2c -c public <target> CPQFCA-MIB::cpqFcaOsCommonPollFreq
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.16.2.1.4.1.1 snmpget -v2c -c public <target> CPQFCA-MIB::cpqFcaOsCommonPollFreq.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.232.16.2.1.4.1.1 i <value>
Start monitoring Legacy Compaq Fibre Channel Array (CPQFCA) storage controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQFCA-MIB::cpqFcaOsCommonPollFreq OID value, configure state conditions and alerts, and monitor any Legacy Compaq Fibre Channel Array (CPQFCA) storage controller from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.16 | cpqFibreArray | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2 | cpqFcaComponent | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.1 | cpqFcaInterface | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.1.4 | cpqFcaOsCommon | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.1.4.1 | cpqFcaOsCommonPollFreq | CPQFCA-MIB |