All MIBs › CPQFCA-MIB › cpqFcaHostCntlrStatus
cpqFcaHostCntlrStatus
Module: CPQFCA-MIB
OID (symbolic): CPQFCA-MIB::cpqFcaHostCntlrStatus
OID (numeric): 1.3.6.1.4.1.232.16.2.7.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Fibre Channel Host Controller Status.
The host controller can be in one of the following states:
Other (1) The agent is unable to determine the status of the host controller.
Ok (2) Indicates that the host controller is in normal operation mode.
Failed (3) Indicates that the host controller has failed and should be replaced.
Shutdown (4) Indicates that the host controller has been shutdown.
LoopDegraded (5) Indicates that the fibre channel connection is degraded.
LoopFailed (6) Indicates that the fibre channel connection is failed.
NotConnected (7) Indicates that the fibre channel port is not connected or the device to which it is connected is powered down.
What is cpqFcaHostCntlrStatus?
This enumerated value reports the operational state of the Fibre Channel host controller, such as other, ok, failed, shutdown, loopDegraded, loopFailed, or notConnected. An admin polls this as the primary health check for the HBA itself, distinct from the storage devices behind it, since loopFailed(6) points to a Fibre Channel loop problem rather than a drive problem. For example, seeing loopDegraded(5) would prompt checking Fibre Channel cabling and loop topology rather than suspecting the physical disks.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.16.2.7.1.1.4 snmpwalk -v2c -c public <target> CPQFCA-MIB::cpqFcaHostCntlrStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.16.2.7.1.1.4.1 snmpget -v2c -c public <target> CPQFCA-MIB::cpqFcaHostCntlrStatus.1
Start monitoring Legacy Compaq Fibre Channel Array (CPQFCA) storage controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQFCA-MIB::cpqFcaHostCntlrStatus OID value, configure state conditions and alerts, and monitor any Legacy Compaq Fibre Channel Array (CPQFCA) storage controller from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.16 | cpqFibreArray | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2 | cpqFcaComponent | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.7 | cpqFcaHostCntlr | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.7.1 | cpqFcaHostCntlrTable | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.7.1.1 | cpqFcaHostCntlrEntry | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.7.1.1.4 | cpqFcaHostCntlrStatus | CPQFCA-MIB |