All MIBs › CPQFCA-MIB › cpqFcTapeLibraryHotSwap
cpqFcTapeLibraryHotSwap
Module: CPQFCA-MIB
OID (symbolic): CPQFCA-MIB::cpqFcTapeLibraryHotSwap
OID (numeric): 1.3.6.1.4.1.232.16.3.2.1.1.19
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: External Tape Library Hot Swap Status.
Hot swap status denotes the presence of hot swappable internal components such as drives, fans, power supplies, etc. The library hot swap status can be in one of the following states:
other(1) The library hot swap status is unknown.
notSupported(2) Indicates that the library cannot detect or report hot swap status.
capable(3) Indicates that the library is capable of detecting and reporting hot swappable internal components and has at least one hot swappable component.
notCapable(4) Indicates that the library is capable of detecting and reporting hot swappable internal components but there are no hot swappable components installed.
What is cpqFcTapeLibraryHotSwap?
This enumerated value reports whether internal components like drives, fans, or power supplies in the library support hot-swap replacement, as other, notSupported, capable, or notCapable. An admin checks this before attempting to replace a failed internal component, since notCapable(4) means the library must be powered down for that repair. For example, confirming capable(3) before replacing a failed tape drive inside the library lets the technician do so without disrupting other library operations.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.16.3.2.1.1.19 snmpwalk -v2c -c public <target> CPQFCA-MIB::cpqFcTapeLibraryHotSwap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.16.3.2.1.1.19.1 snmpget -v2c -c public <target> CPQFCA-MIB::cpqFcTapeLibraryHotSwap.1
Start monitoring Legacy Compaq Fibre Channel Array (CPQFCA) storage controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQFCA-MIB::cpqFcTapeLibraryHotSwap OID value, configure state conditions and alerts, and monitor any Legacy Compaq Fibre Channel Array (CPQFCA) storage controller from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.16 | cpqFibreArray | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.3 | cpqFcTapeComponent | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.3.2 | cpqFcTapeLibrary | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.3.2.1 | cpqFcTapeLibraryTable | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.3.2.1.1 | cpqFcTapeLibraryEntry | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.3.2.1.1.19 | cpqFcTapeLibraryHotSwap | CPQFCA-MIB |