COLUBRIS-802DOT11-MIB :: coDot11CurrentSecondaryChannel

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCOLUBRIS-802DOT11-MIBcoDot11CurrentSecondaryChannel

coDot11CurrentSecondaryChannel

Module: COLUBRIS-802DOT11-MIB

OID (symbolic): COLUBRIS-802DOT11-MIB::coDot11CurrentSecondaryChannel

OID (numeric): 1.3.6.1.4.1.8744.5.4.3.14.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: This attribute indicates the channel number of the secondary channel. If 20/40 MHz mode is not currently in use, this attribute value is 0.

What is coDot11CurrentSecondaryChannel?

This Integer32 reports the secondary channel number used to extend the primary channel into a 40 MHz bonded channel, and it reads 0 whenever 40 MHz mode is not currently active. An admin uses it to verify which channel pair is actually bonded together on a radio configured for wide-channel operation. For example, a primary channel of 36 paired with a secondary channel of 40 tells the admin the AP is using the 36+40 40 MHz channel, while a secondary value of 0 means it fell back to plain 20 MHz.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8744.5.4.3.14.1.4
snmpwalk -v2c -c public <target> COLUBRIS-802DOT11-MIB::coDot11CurrentSecondaryChannel

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8744.5.4.3.14.1.4.1
snmpget -v2c -c public <target> COLUBRIS-802DOT11-MIB::coDot11CurrentSecondaryChannel.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> coDot11CurrentSecondaryChannel.1

Start monitoring Colubris/HP 802.11 wireless access point (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COLUBRIS-802DOT11-MIB::coDot11CurrentSecondaryChannel OID value, configure state conditions and alerts, and monitor any Colubris/HP 802.11 wireless access point (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8744colubrisCOLUBRIS-SMI
1.3.6.1.4.1.8744.5colubrisMgmtV2COLUBRIS-SMI
Numeric OIDNameModule
1.3.6.1.4.1.8744.5.4colubris802dot11COLUBRIS-802DOT11-MIB
1.3.6.1.4.1.8744.5.4.3coDot11phyCOLUBRIS-802DOT11-MIB
1.3.6.1.4.1.8744.5.4.3.14coDot11PhyHTTableCOLUBRIS-802DOT11-MIB
1.3.6.1.4.1.8744.5.4.3.14.1coDot11PhyHTEntryCOLUBRIS-802DOT11-MIB
1.3.6.1.4.1.8744.5.4.3.14.1.4coDot11CurrentSecondaryChannelCOLUBRIS-802DOT11-MIB