All MIBs › CME-MIB › policyControlBladeHealthState
policyControlBladeHealthState
Module: CME-MIB
OID (symbolic): CME-MIB::policyControlBladeHealthState
OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The system health state for the blade.
Unknown: Blade is in an undefined state. Good: Blade is operating normally. Warning: One or more outstanding warnings exist for this blade. Critical: One or more outstanding critical events for this blade. Kernel Mode: Blade is in kernel mode. Discovering: The MM is currently in the process of discovering this blade. Communications Error: The MM failed to communicate with this blade. No Power: No power to the blade's domain. Flashing: Flashing in progress. Initialization Failure: Blade failed to initialized. Insufficient Power: Not enough power is left in the blade's domain to power the blade. Power Denied: Power was denied to the blade.
What is policyControlBladeHealthState?
This read-only enum reports the overall system health of a blade -- unknown, good, warning, critical, kernel mode, discovering, or other documented states -- within the power-policy context. It gives an admin an at-a-glance signal of whether it's even sensible to apply a power policy change to that blade right now, since a blade mid-discovery or in a critical state may not respond as expected. An admin seeing policyControlBladeHealthState report critical(3) for a blade would investigate that blade's actual alerts before attempting any power-policy change on it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.5 snmpwalk -v2c -c public <target> CME-MIB::policyControlBladeHealthState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.5.1 snmpget -v2c -c public <target> CME-MIB::policyControlBladeHealthState.1
Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::policyControlBladeHealthState OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.
OID Breakdown
Upper-level ancestors (15 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | BLADE-MIB |
| 1.3.6.1.4.1.2.3 | ibmAgents | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51 | netfinitySupportProcessorAgent | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2 | bladeCenterSnmpMIB | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22 | bladeCenter | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1 | processorBlade | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.4 | bladeRemoteControl | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1 | bladeRemoteControlTable | BLADE-MIB |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1 | bladeRemoteControlEntry | BLADE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.5 | policyControlBladeHealthState | CME-MIB |