CME-MIB :: firmwareUpdateTftpServer

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCME-MIBfirmwareUpdateTftpServer

firmwareUpdateTftpServer

Module: CME-MIB

OID (symbolic): CME-MIB::firmwareUpdateTftpServer

OID (numeric): 1.3.6.1.4.1.2.3.51.2.22.9.2

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: If flashing via the legacy method using a tftp server, then set the IP address or host name of the TFTP server where the firmware file resides. The address must be entered in a dotted decimal IP string (e.g. 9.37.44.2).

NOTE: IPv6 numeric addresses must be enclosed with brackets (e.g. [fe80::5652:ff:fe50:53b6]).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.9.2
snmpwalk -v2c -c public <target> CME-MIB::firmwareUpdateTftpServer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.3.51.2.22.9.2.1
snmpget -v2c -c public <target> CME-MIB::firmwareUpdateTftpServer.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2.3.51.2.22.9.2.1 s <value>

Start monitoring Cisco Communications Manager Express (CME) router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CME-MIB::firmwareUpdateTftpServer OID value, configure state conditions and alerts, and monitor any Cisco Communications Manager Express (CME) router/gateway from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2ibmBLADE-MIB
1.3.6.1.4.1.2.3ibmAgentsBLADE-MIB
1.3.6.1.4.1.2.3.51netfinitySupportProcessorAgentBLADE-MIB
1.3.6.1.4.1.2.3.51.2bladeCenterSnmpMIBBLADE-MIB
1.3.6.1.4.1.2.3.51.2.22bladeCenterBLADE-MIB
1.3.6.1.4.1.2.3.51.2.22.9firmwareUpdateBLADE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2.3.51.2.22.9.2firmwareUpdateTftpServerCME-MIB