All MIBs › CISCO-WIRELESS-P2MP-PHY-MIB › p2mpRfSupplyVoltageState
p2mpRfSupplyVoltageState
Module: CISCO-WIRELESS-P2MP-PHY-MIB
OID (symbolic): CISCO-WIRELESS-P2MP-PHY-MIB::p2mpRfSupplyVoltageState
OID (numeric): 1.3.6.1.4.1.9.9.170.1.1.2.1.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object specifies whether the voltage supply to the RF unit is within specifications or not. Voltage specifications are hardware dependent.
What is p2mpRfSupplyVoltageState?
This read-only object indicates whether the DC voltage feeding the RF unit is within the hardware's specified range, returning withinSpecification(1) or outsideSpecification(2). Since the desc notes the actual voltage limits are hardware dependent, this object gives a normalized pass/fail signal an admin can alarm on without needing to know the unit's exact voltage tolerances. For instance, a technician troubleshooting intermittent link drops on a rooftop radio could check this OID and see outsideSpecification(2), suggesting a failing power supply or cabling issue rather than an RF alignment problem.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.1.2.1.1.13 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpRfSupplyVoltageState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.1.2.1.1.13.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpRfSupplyVoltageState.1
Start monitoring Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-PHY-MIB::p2mpRfSupplyVoltageState OID value, configure state conditions and alerts, and monitor any Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.170 | ciscoWirelessPhyMIB | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1 | p2mpRadioObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1 | p2mpRadioBaseObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2 | p2mpFreqResourceGroup | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2.1 | p2mpRfTable | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1 | p2mpRfEntry | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.13 | p2mpRfSupplyVoltageState | CISCO-WIRELESS-P2MP-PHY-MIB |