All MIBs › CISCO-WIRELESS-P2MP-PHY-MIB › p2mpRfLoopbackSupported
p2mpRfLoopbackSupported
Module: CISCO-WIRELESS-P2MP-PHY-MIB
OID (symbolic): CISCO-WIRELESS-P2MP-PHY-MIB::p2mpRfLoopbackSupported
OID (numeric): 1.3.6.1.4.1.9.9.170.1.1.2.1.1.15
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-only
Description: This object indicates if the RF unit supports loopback. When true(1), the user can configure loopback using the objects in p2mpLoopbackTable. When false(2), any attempt to configure RF loopback will fail.
What is p2mpRfLoopbackSupported?
This read-only TruthValue tells whether the RF unit's hardware is capable of performing an RF loopback test at all. The desc specifies that when true(1) an admin can go on to configure loopback settings in the p2mpLoopbackTable, while on false(2) hardware any attempt to set up RF loopback will simply fail. An administrator planning a remote diagnostic session on a P2MP link should check this object first, so as not to waste time configuring loopback parameters on hardware that doesn't support the feature.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.1.2.1.1.15 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpRfLoopbackSupported
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.1.2.1.1.15.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpRfLoopbackSupported.1
Start monitoring Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-PHY-MIB::p2mpRfLoopbackSupported OID value, configure state conditions and alerts, and monitor any Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.170 | ciscoWirelessPhyMIB | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1 | p2mpRadioObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1 | p2mpRadioBaseObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2 | p2mpFreqResourceGroup | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2.1 | p2mpRfTable | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1 | p2mpRfEntry | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2.1.1.15 | p2mpRfLoopbackSupported | CISCO-WIRELESS-P2MP-PHY-MIB |