CISCO-WIRELESS-P2MP-PHY-MIB :: p2mpMinTxPower

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-P2MP-PHY-MIBp2mpMinTxPower

p2mpMinTxPower

Module: CISCO-WIRELESS-P2MP-PHY-MIB

OID (symbolic): CISCO-WIRELESS-P2MP-PHY-MIB::p2mpMinTxPower

OID (numeric): 1.3.6.1.4.1.9.9.170.1.1.2.1.1.8

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: This object represents the minimum power that the RF subsystem can supply the antenna.

What is p2mpMinTxPower?

A read-only Integer32 (-80..50 dBm) giving the minimum transmit power the RF subsystem is capable of supplying to the antenna. This is the floor of the hardware's power-control range, relevant when diagnosing why an automatic power control loop cannot reduce power further even in very favorable link conditions. For example, if an admin wanted the radio to run at an unusually low power for a very short, high-quality link, they would need to confirm that target power is still at or above p2mpMinTxPower before it could actually be configured.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.1.2.1.1.8
snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpMinTxPower

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.1.2.1.1.8.1
snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpMinTxPower.1

Start monitoring Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-PHY-MIB::p2mpMinTxPower OID value, configure state conditions and alerts, and monitor any Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.170ciscoWirelessPhyMIBCISCO-WIRELESS-P2MP-PHY-MIB
1.3.6.1.4.1.9.9.170.1p2mpRadioObjectsCISCO-WIRELESS-P2MP-PHY-MIB
1.3.6.1.4.1.9.9.170.1.1p2mpRadioBaseObjectsCISCO-WIRELESS-P2MP-PHY-MIB
1.3.6.1.4.1.9.9.170.1.1.2p2mpFreqResourceGroupCISCO-WIRELESS-P2MP-PHY-MIB
1.3.6.1.4.1.9.9.170.1.1.2.1p2mpRfTableCISCO-WIRELESS-P2MP-PHY-MIB
1.3.6.1.4.1.9.9.170.1.1.2.1.1p2mpRfEntryCISCO-WIRELESS-P2MP-PHY-MIB
1.3.6.1.4.1.9.9.170.1.1.2.1.1.8p2mpMinTxPowerCISCO-WIRELESS-P2MP-PHY-MIB