All MIBs › CISCO-WIRELESS-P2MP-PHY-MIB › p2mpLocalLoopbackChannel
p2mpLocalLoopbackChannel
Module: CISCO-WIRELESS-P2MP-PHY-MIB
OID (symbolic): CISCO-WIRELESS-P2MP-PHY-MIB::p2mpLocalLoopbackChannel
OID (numeric): 1.3.6.1.4.1.9.9.170.1.1.3.1.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object identifies the channel being used to loopback the data. This object is not applicable for loopback testing when p2mpLocalLoopbackMode has a value of 'noLoopback(1)'.
What is p2mpLocalLoopbackChannel?
This read-write object selects which of up to seven channels is used when looping back data for a diagnostic test, and like the related loopback objects it has no effect while p2mpLocalLoopbackMode is noLoopback(1). It lets an admin target a specific frequency channel for the loopback test rather than whichever channel happens to be active. For example, if intermittent errors are suspected on channel 4 specifically, the admin sets p2mpLocalLoopbackChannel to 4 before running the loopback diagnostic to confirm the fault is channel-specific.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.1.3.1.1.3 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpLocalLoopbackChannel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.1.3.1.1.3.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpLocalLoopbackChannel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.170.1.1.3.1.1.3.1 i <value>
Start monitoring Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-PHY-MIB::p2mpLocalLoopbackChannel OID value, configure state conditions and alerts, and monitor any Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.170 | ciscoWirelessPhyMIB | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1 | p2mpRadioObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1 | p2mpRadioBaseObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.3 | p2mpRadioTestGroup | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.3.1 | p2mpLoopbackTable | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.3.1.1 | p2mpLoopbackEntry | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.3.1.1.3 | p2mpLocalLoopbackChannel | CISCO-WIRELESS-P2MP-PHY-MIB |