All MIBs › CISCO-WIRELESS-P2MP-PHY-MIB › p2mpLocalLoopbackAntenna
p2mpLocalLoopbackAntenna
Module: CISCO-WIRELESS-P2MP-PHY-MIB
OID (symbolic): CISCO-WIRELESS-P2MP-PHY-MIB::p2mpLocalLoopbackAntenna
OID (numeric): 1.3.6.1.4.1.9.9.170.1.1.3.1.1.2
Node type: OBJECT-TYPE
Type: CwrRfType
Access: read-write
Description: This object identifies the RF resource used for loopback testing. This object is not applicable for loopback testing when p2mpLocalLoopbackMode has a value of 'noLoopback(1)'.
What is p2mpLocalLoopbackAntenna?
This read-write object specifies which RF resource, main or diversity, is used when performing a loopback test, and per the desc it has no effect when p2mpLocalLoopbackMode is set to noLoopback(1). An admin sets this alongside p2mpLocalLoopbackMode to target a specific radio chain for RF-level loopback diagnostics. For example, to isolate a suspected fault on the diversity chain specifically, the admin would set p2mpLocalLoopbackAntenna to the diversity resource before initiating the RF loopback test.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.1.3.1.1.2 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpLocalLoopbackAntenna
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.1.3.1.1.2.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpLocalLoopbackAntenna.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.170.1.1.3.1.1.2.1 s <value>
Start monitoring Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-PHY-MIB::p2mpLocalLoopbackAntenna OID value, configure state conditions and alerts, and monitor any Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.170 | ciscoWirelessPhyMIB | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1 | p2mpRadioObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1 | p2mpRadioBaseObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.3 | p2mpRadioTestGroup | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.3.1 | p2mpLoopbackTable | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.3.1.1 | p2mpLoopbackEntry | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.3.1.1.2 | p2mpLocalLoopbackAntenna | CISCO-WIRELESS-P2MP-PHY-MIB |