All MIBs › CISCO-WIRELESS-P2MP-PHY-MIB › p2mpHeTrapEnable
p2mpHeTrapEnable
Module: CISCO-WIRELESS-P2MP-PHY-MIB
OID (symbolic): CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeTrapEnable
OID (numeric): 1.3.6.1.4.1.9.9.170.1.3.2.1.6
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: When set to true(1), this enables the notifications that are specific to the head end. When set to false(2), these notifications are disabled.
What is p2mpHeTrapEnable?
This read-write object turns the head-end-specific SNMP notifications on or off, with true(1) enabling them and false(2) disabling them. An admin toggles this to control whether the head end proactively alerts the management station to head-end conditions or stays silent, relying only on polling. For example, if a head-end unit is generating an excessive volume of trap traffic during a known maintenance window, the admin could temporarily set p2mpHeTrapEnable to false to quiet those notifications.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.3.2.1.6 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeTrapEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.3.2.1.6.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeTrapEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.170.1.3.2.1.6.1 s <value>
Start monitoring Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeTrapEnable OID value, configure state conditions and alerts, and monitor any Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.170 | ciscoWirelessPhyMIB | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1 | p2mpRadioObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3 | p2mpRadioHeObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3.2 | p2mpHeIntFreqTable | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3.2.1 | p2mpHeIntFreqEntry | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3.2.1.6 | p2mpHeTrapEnable | CISCO-WIRELESS-P2MP-PHY-MIB |