All MIBs › CISCO-WIRELESS-P2MP-PHY-MIB › p2mpHeIfTxOscState
p2mpHeIfTxOscState
Module: CISCO-WIRELESS-P2MP-PHY-MIB
OID (symbolic): CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeIfTxOscState
OID (numeric): 1.3.6.1.4.1.9.9.170.1.3.2.1.1
Node type: OBJECT-TYPE
Type: CwrOscState
Access: read-only
Description: This object indicates the state of the IF transmit oscillator. The oscillator must be in oscillatorOk(1) state for the system to function properly.
What is p2mpHeIfTxOscState?
This read-only object reports the operating state of the Head End's IF transmit oscillator, and per the desc it must read oscillatorOk(1) for the system to function properly. It's the head-end IF-stage counterpart to p2mpRfRxOscState, letting an admin isolate faults to the intermediate-frequency transmit circuitry specifically. For example, if a head end stops transmitting to any subscriber units on that link, checking p2mpHeIfTxOscState for a non-ok value would point to a failed IF oscillator rather than an RF or antenna issue.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.3.2.1.1 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeIfTxOscState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.3.2.1.1.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeIfTxOscState.1
Start monitoring Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeIfTxOscState OID value, configure state conditions and alerts, and monitor any Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.170 | ciscoWirelessPhyMIB | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1 | p2mpRadioObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3 | p2mpRadioHeObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3.2 | p2mpHeIntFreqTable | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3.2.1 | p2mpHeIntFreqEntry | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3.2.1.1 | p2mpHeIfTxOscState | CISCO-WIRELESS-P2MP-PHY-MIB |