All MIBs › CISCO-WIRELESS-P2MP-PHY-MIB › p2mpHeIfRxOscState
p2mpHeIfRxOscState
Module: CISCO-WIRELESS-P2MP-PHY-MIB
OID (symbolic): CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeIfRxOscState
OID (numeric): 1.3.6.1.4.1.9.9.170.1.3.2.1.2
Node type: OBJECT-TYPE
Type: CwrOscState
Access: read-only
Description: This object indicates the state of the IF receive oscillator. The oscillator must be in oscillatorOk(1) state for the system to function properly.
What is p2mpHeIfRxOscState?
This read-only object reports the operating state of the Head End's IF receive oscillator, which the desc says must read oscillatorOk(1) for proper system operation. It lets an admin narrow down receive-side problems at the head end to the IF receive circuitry specifically, separate from the RF or IF transmit paths. For example, if the head end can transmit but fails to properly receive from any subscriber units, an admin would check p2mpHeIfRxOscState for a fault before suspecting the antenna system.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.3.2.1.2 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeIfRxOscState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.3.2.1.2.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeIfRxOscState.1
Start monitoring Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeIfRxOscState OID value, configure state conditions and alerts, and monitor any Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.170 | ciscoWirelessPhyMIB | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1 | p2mpRadioObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3 | p2mpRadioHeObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3.2 | p2mpHeIntFreqTable | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3.2.1 | p2mpHeIntFreqEntry | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3.2.1.2 | p2mpHeIfRxOscState | CISCO-WIRELESS-P2MP-PHY-MIB |