All MIBs › CISCO-WIRELESS-P2MP-PHY-MIB › p2mpHeIfInpFreq
p2mpHeIfInpFreq
Module: CISCO-WIRELESS-P2MP-PHY-MIB
OID (symbolic): CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeIfInpFreq
OID (numeric): 1.3.6.1.4.1.9.9.170.1.3.2.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object represents the IF input frequency.
What is p2mpHeIfInpFreq?
This read-only object reports, in KHz, the current IF input frequency at the Head End, within a range of 1000 to 500000 KHz. An admin can use it to verify the head end's intermediate-frequency stage is operating at the expected frequency for the configured RF plan. For example, if a link is failing to establish, comparing the actual p2mpHeIfInpFreq against the expected IF plan value can reveal a frequency-conversion misconfiguration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.3.2.1.4 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeIfInpFreq
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.3.2.1.4.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeIfInpFreq.1
Start monitoring Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-PHY-MIB::p2mpHeIfInpFreq OID value, configure state conditions and alerts, and monitor any Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.170 | ciscoWirelessPhyMIB | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1 | p2mpRadioObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3 | p2mpRadioHeObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3.2 | p2mpHeIntFreqTable | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3.2.1 | p2mpHeIntFreqEntry | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.3.2.1.4 | p2mpHeIfInpFreq | CISCO-WIRELESS-P2MP-PHY-MIB |