All MIBs › CISCO-WIRELESS-P2MP-PHY-MIB › p2mpDuplexerTxInsertionLoss
p2mpDuplexerTxInsertionLoss
Module: CISCO-WIRELESS-P2MP-PHY-MIB
OID (symbolic): CISCO-WIRELESS-P2MP-PHY-MIB::p2mpDuplexerTxInsertionLoss
OID (numeric): 1.3.6.1.4.1.9.9.170.1.1.2.2.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: This object represents the loss in 'dB' that would result in the transmission path due to the duplexer.
What is p2mpDuplexerTxInsertionLoss?
This read-only object, in dB, reports the signal loss the duplexer introduces into the transmit path. An admin uses this value to account for hardware-induced attenuation when calculating expected transmit power at the antenna versus what the radio itself outputs. For example, if measured link power seems lower than expected, the admin can check p2mpDuplexerTxInsertionLoss to see how much of that shortfall is simply the duplexer's built-in insertion loss rather than a radio fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.1.2.2.1.8 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpDuplexerTxInsertionLoss
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.1.2.2.1.8.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpDuplexerTxInsertionLoss.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> p2mpDuplexerTxInsertionLoss.1
Start monitoring Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-PHY-MIB::p2mpDuplexerTxInsertionLoss OID value, configure state conditions and alerts, and monitor any Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.170 | ciscoWirelessPhyMIB | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1 | p2mpRadioObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1 | p2mpRadioBaseObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2 | p2mpFreqResourceGroup | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2.2 | p2mpDuplexerTable | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2.2.1 | p2mpDuplexerEntry | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2.2.1.8 | p2mpDuplexerTxInsertionLoss | CISCO-WIRELESS-P2MP-PHY-MIB |