All MIBs › CISCO-WIRELESS-P2MP-PHY-MIB › p2mpDuplexerHiPassbandMaxFreq
p2mpDuplexerHiPassbandMaxFreq
Module: CISCO-WIRELESS-P2MP-PHY-MIB
OID (symbolic): CISCO-WIRELESS-P2MP-PHY-MIB::p2mpDuplexerHiPassbandMaxFreq
OID (numeric): 1.3.6.1.4.1.9.9.170.1.1.2.2.1.6
Node type: OBJECT-TYPE
Type: CwrRfFreqRange
Access: read-only
Description: This object identifies the maximum frequency in the high passband that this duplexer will pass through without attenuation.
What is p2mpDuplexerHiPassbandMaxFreq?
This read-only object, in MHz, reports the highest frequency edge of the duplexer's high passband, above which the duplexer attenuates rather than passes the signal. Together with p2mpDuplexerHiPassbandMinFreq it defines the usable width of the upper frequency range available on that duplexer. For example, when diagnosing a weak received signal, an admin can compare the radio's actual receive frequency against this maximum to rule out the duplexer clipping the top of the band.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.1.2.2.1.6 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpDuplexerHiPassbandMaxFreq
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.170.1.1.2.2.1.6.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-PHY-MIB::p2mpDuplexerHiPassbandMaxFreq.1
Start monitoring Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-PHY-MIB::p2mpDuplexerHiPassbandMaxFreq OID value, configure state conditions and alerts, and monitor any Cisco wireless P2MP radio (head-end and subscriber-unit, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.170 | ciscoWirelessPhyMIB | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1 | p2mpRadioObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1 | p2mpRadioBaseObjects | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2 | p2mpFreqResourceGroup | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2.2 | p2mpDuplexerTable | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2.2.1 | p2mpDuplexerEntry | CISCO-WIRELESS-P2MP-PHY-MIB |
| 1.3.6.1.4.1.9.9.170.1.1.2.2.1.6 | p2mpDuplexerHiPassbandMaxFreq | CISCO-WIRELESS-P2MP-PHY-MIB |