CISCO-WIRELESS-NOTIFICATION-MIB :: cWNotificationManagedObjectAddress

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-WIRELESS-NOTIFICATION-MIB › cWNotificationManagedObjectAddress

cWNotificationManagedObjectAddress

Module: CISCO-WIRELESS-NOTIFICATION-MIB

OID (symbolic): CISCO-WIRELESS-NOTIFICATION-MIB::cWNotificationManagedObjectAddress

OID (numeric): 1.3.6.1.4.1.9.9.712.1.1.2.1.8

Node type: OBJECT-TYPE

Type: InetAddress

Access: read-only

Description: This object represents the network address of the Managed Object. The type of the address stored in this object is determined by the cWNotificationManagedObjectAddressType object.

What is cWNotificationManagedObjectAddress?

A read-only InetAddress giving the network address of the managed object, such as an access point, that this notification concerns. It lets an admin immediately identify and reach the specific device involved in the alert, using the address format described by the companion cWNotificationManagedObjectAddressType object. For example, a coverage-hole alert's cWNotificationManagedObjectAddress would give the IP address of the affected access point, letting the admin connect directly to that device for investigation.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.712.1.1.2.1.8
snmpwalk -v2c -c public <target> CISCO-WIRELESS-NOTIFICATION-MIB::cWNotificationManagedObjectAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.712.1.1.2.1.8.1
snmpget -v2c -c public <target> CISCO-WIRELESS-NOTIFICATION-MIB::cWNotificationManagedObjectAddress.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cWNotificationManagedObjectAddress.1

Start monitoring Cisco Wireless LAN Controller / AP-managed wireless network with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-NOTIFICATION-MIB::cWNotificationManagedObjectAddress OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controller / AP-managed wireless network from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.712ciscoWirelessNotificationMIBCISCO-WIRELESS-NOTIFICATION-MIB
1.3.6.1.4.1.9.9.712.1ciscoWirelessNotificationMIBObjectsCISCO-WIRELESS-NOTIFICATION-MIB
1.3.6.1.4.1.9.9.712.1.1cWNotificationDataCISCO-WIRELESS-NOTIFICATION-MIB
1.3.6.1.4.1.9.9.712.1.1.2cwNotificationHistoryTableCISCO-WIRELESS-NOTIFICATION-MIB
1.3.6.1.4.1.9.9.712.1.1.2.1cwNotificationHistoryEntryCISCO-WIRELESS-NOTIFICATION-MIB
1.3.6.1.4.1.9.9.712.1.1.2.1.8cWNotificationManagedObjectAddressCISCO-WIRELESS-NOTIFICATION-MIB