CISCO-WAN-SVC-MIB :: cwspUtilFactorNrtVbr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-SVC-MIBcwspUtilFactorNrtVbr

cwspUtilFactorNrtVbr

Module: CISCO-WAN-SVC-MIB

OID (symbolic): CISCO-WAN-SVC-MIB::cwspUtilFactorNrtVbr

OID (numeric): 1.3.6.1.4.1.351.140.1.2.2.1.1.3

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This is the booking factor for non-real time VBR service

What is cwspUtilFactorNrtVbr?

This read-write Integer32, ranging from 1 to 200, is the booking factor for non-real time VBR service, a multiplier the switch applies when computing how much of an interface's capacity a new non-real-time VBR connection is booked as consuming. An administrator tunes this booking factor to control call-admission aggressiveness for non-real-time VBR traffic on the interface: a value above 100 lets the switch oversubscribe (statistically multiplex) non-real-time VBR connections, while 100 books calls at their literal declared rate. For example, setting cwspUtilFactorNrtVbr to 150 tells the admission-control logic to treat each new non-real-time VBR call as consuming only two-thirds of its nominal bandwidth for booking purposes, allowing more non-real-time VBR SVCs to be admitted on the same trunk.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.140.1.2.2.1.1.3
snmpwalk -v2c -c public <target> CISCO-WAN-SVC-MIB::cwspUtilFactorNrtVbr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.140.1.2.2.1.1.3.1
snmpget -v2c -c public <target> CISCO-WAN-SVC-MIB::cwspUtilFactorNrtVbr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.140.1.2.2.1.1.3.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cwspUtilFactorNrtVbr.1

Start monitoring Cisco BPX-SES/MGX ATM switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-SVC-MIB::cwspUtilFactorNrtVbr OID value, configure state conditions and alerts, and monitor any Cisco BPX-SES/MGX ATM switch (legacy) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.351.140ciscoWANSvcMIBCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1ciscoWANSvcMIBObjectsCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2ciscoWANSvcPortCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2cwspCacConfigCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2.1cwspCacConfigTableCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2.1.1cwspCacConfigEntryCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2.1.1.3cwspUtilFactorNrtVbrCISCO-WAN-SVC-MIB