CISCO-WAN-SVC-MIB :: cwspSigCfgT308

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-SVC-MIBcwspSigCfgT308

cwspSigCfgT308

Module: CISCO-WAN-SVC-MIB

OID (symbolic): CISCO-WAN-SVC-MIB::cwspSigCfgT308

OID (numeric): 1.3.6.1.4.1.351.140.1.2.3.1.1.3

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Timer started when RELEASE message sent at Release Indication State. Normally, timer is stopped when RELEASE COMPLETE or RELEASE message is received. Resend RELEASE and restart the timer at first expiry; Release call reference and enter NULL state at second expiry.

What is cwspSigCfgT308?

This writable value configures, in seconds, ATM signaling timer T308, which starts when a RELEASE message is sent in the Release Indication state; it is normally stopped by a RELEASE COMPLETE or RELEASE message, and on first expiry the RELEASE is resent while a second expiry releases the call reference and enters the NULL state. It lets an admin control how persistently the switch retries tearing down a call whose peer isn't acknowledging the release. For example, an admin cleaning up stuck calls on a busy trunk might shorten T308 so unacknowledged RELEASE messages are retried and cleared faster.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.140.1.2.3.1.1.3
snmpwalk -v2c -c public <target> CISCO-WAN-SVC-MIB::cwspSigCfgT308

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.140.1.2.3.1.1.3.1
snmpget -v2c -c public <target> CISCO-WAN-SVC-MIB::cwspSigCfgT308.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.140.1.2.3.1.1.3.1 i <value>

Start monitoring Cisco BPX-SES/MGX ATM switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-SVC-MIB::cwspSigCfgT308 OID value, configure state conditions and alerts, and monitor any Cisco BPX-SES/MGX ATM switch (legacy) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.351.140ciscoWANSvcMIBCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1ciscoWANSvcMIBObjectsCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2ciscoWANSvcPortCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.3cwspSigConfigCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.3.1cwspSigConfigTableCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.3.1.1cwspSigConfigEntryCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.3.1.1.3cwspSigCfgT308CISCO-WAN-SVC-MIB