All MIBs › CISCO-WAN-SVC-MIB › cwspOperIlmiVersion
cwspOperIlmiVersion
Module: CISCO-WAN-SVC-MIB
OID (symbolic): CISCO-WAN-SVC-MIB::cwspOperIlmiVersion
OID (numeric): 1.3.6.1.4.1.351.140.1.2.15.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: An indication of the latest version of the ATM Forum ILMI Specification that is supported on this ATM Interface.
If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed.
If this object is not present, a version of the ILMI earlier than 4.0 is supported.
What is cwspOperIlmiVersion?
This read-only INTEGER reports the latest version of the ATM Forum ILMI Specification supported on this interface, unsupported(1) or version4point0(2), with the negotiated version depending on comparing local and peer IME values. An administrator checks this to know whether ILMI-based auto-configuration and address registration on this interface is running the modern 4.0 specification or is unsupported. For example, an interface where address registration behaves inconsistently is checked via cwspOperIlmiVersion to confirm ILMI 4.0 is actually negotiated rather than falling back to unsupported.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.140.1.2.15.1.1.11 snmpwalk -v2c -c public <target> CISCO-WAN-SVC-MIB::cwspOperIlmiVersion
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.140.1.2.15.1.1.11.1 snmpget -v2c -c public <target> CISCO-WAN-SVC-MIB::cwspOperIlmiVersion.1
Start monitoring Cisco BPX-SES/MGX ATM switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-SVC-MIB::cwspOperIlmiVersion OID value, configure state conditions and alerts, and monitor any Cisco BPX-SES/MGX ATM switch (legacy) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.140 | ciscoWANSvcMIB | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1 | ciscoWANSvcMIBObjects | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1.2 | ciscoWANSvcPort | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1.2.15 | cwspOperation | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1.2.15.1 | cwspOperationTable | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1.2.15.1.1 | cwspOperationEntry | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1.2.15.1.1.11 | cwspOperIlmiVersion | CISCO-WAN-SVC-MIB |