CISCO-WAN-SVC-MIB :: cwspMinVcAbr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-SVC-MIBcwspMinVcAbr

cwspMinVcAbr

Module: CISCO-WAN-SVC-MIB

OID (symbolic): CISCO-WAN-SVC-MIB::cwspMinVcAbr

OID (numeric): 1.3.6.1.4.1.351.140.1.2.2.1.1.24

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This is the minimum number of VCs for ABR service in percentage.

The values of cwspMinVcCbr, cwspMinVcRtVbr, cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed 1000000, i.e. 100%.

The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.

What is cwspMinVcAbr?

This read-write Integer32 (0..1000000) is the minimum number of VCs reserved for ABR (Available Bit Rate) service as a percentage of the interface's VC capacity, and the combined minimums for CBR, real-time VBR, non-real-time VBR, ABR, and UBR cannot exceed 1000000 (100%). An administrator reserves a share of the finite VC pool for ABR (Available Bit Rate) so that other service classes cannot exhaust every VC and block new ABR (Available Bit Rate) calls from being set up. For example, guaranteeing cwspMinVcAbr at 100000 (10%) ensures at least a tenth of the interface's VCs remain available to ABR (Available Bit Rate) calls even when VBR or UBR traffic is heavily loading the port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.140.1.2.2.1.1.24
snmpwalk -v2c -c public <target> CISCO-WAN-SVC-MIB::cwspMinVcAbr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.140.1.2.2.1.1.24.1
snmpget -v2c -c public <target> CISCO-WAN-SVC-MIB::cwspMinVcAbr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.140.1.2.2.1.1.24.1 i <value>

Start monitoring Cisco BPX-SES/MGX ATM switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-SVC-MIB::cwspMinVcAbr OID value, configure state conditions and alerts, and monitor any Cisco BPX-SES/MGX ATM switch (legacy) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.351.140ciscoWANSvcMIBCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1ciscoWANSvcMIBObjectsCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2ciscoWANSvcPortCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2cwspCacConfigCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2.1cwspCacConfigTableCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2.1.1cwspCacConfigEntryCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2.1.1.24cwspMinVcAbrCISCO-WAN-SVC-MIB