CISCO-WAN-SVC-MIB :: cwspMinBwNrtVbr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-SVC-MIBcwspMinBwNrtVbr

cwspMinBwNrtVbr

Module: CISCO-WAN-SVC-MIB

OID (symbolic): CISCO-WAN-SVC-MIB::cwspMinBwNrtVbr

OID (numeric): 1.3.6.1.4.1.351.140.1.2.2.1.1.13

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This is the minimum bandwidth for non-real time VBR service in percentage. The total values of cwspMinBwCbr, cwspMinBwRtVbr, cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed 1000000, i.e. 100%.

The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.

What is cwspMinBwNrtVbr?

This read-write Integer32 (0..1000000) is the minimum bandwidth reserved for non-real-time VBR service as a percentage in xxx.xxxx format (e.g. 750000 = 75.0000%), and the combined total of cwspMinBwCbr, cwspMinBwRtVbr, cwspMinBwNrtVbr, cwspMinBwAbr, and cwspMinBwUbr cannot exceed 1000000 (100%). An administrator uses this to guarantee non-real-time VBR connections a bandwidth floor on the interface, ensuring that even under heavy contention from other service classes, non-real-time VBR traffic keeps a reserved slice of capacity. For example, setting cwspMinBwNrtVbr to 200000 (20%) while other classes' minimums sum to 60% leaves 20% of capacity unreserved and available for oversubscription across all classes.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.140.1.2.2.1.1.13
snmpwalk -v2c -c public <target> CISCO-WAN-SVC-MIB::cwspMinBwNrtVbr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.140.1.2.2.1.1.13.1
snmpget -v2c -c public <target> CISCO-WAN-SVC-MIB::cwspMinBwNrtVbr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.140.1.2.2.1.1.13.1 i <value>

Start monitoring Cisco BPX-SES/MGX ATM switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-SVC-MIB::cwspMinBwNrtVbr OID value, configure state conditions and alerts, and monitor any Cisco BPX-SES/MGX ATM switch (legacy) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.351.140ciscoWANSvcMIBCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1ciscoWANSvcMIBObjectsCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2ciscoWANSvcPortCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2cwspCacConfigCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2.1cwspCacConfigTableCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2.1.1cwspCacConfigEntryCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2.1.1.13cwspMinBwNrtVbrCISCO-WAN-SVC-MIB