CISCO-WAN-SVC-MIB :: cwspMaxVcUbr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-SVC-MIBcwspMaxVcUbr

cwspMaxVcUbr

Module: CISCO-WAN-SVC-MIB

OID (symbolic): CISCO-WAN-SVC-MIB::cwspMaxVcUbr

OID (numeric): 1.3.6.1.4.1.351.140.1.2.2.1.1.20

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This is the maximum number of VCs for UBR service in percentage.

The value of this variable is interpreted in the format of xxx.xxxx. For example a value of 750000 is interpreted as 75.0000%.

What is cwspMaxVcUbr?

This read-write Integer32 (0..1000000) is the maximum number of VCs (virtual circuits) allowed for UBR (Unspecified Bit Rate) service, expressed as a percentage of the interface's total VC capacity in xxx.xxxx format. An administrator uses this to cap how many simultaneous UBR (Unspecified Bit Rate) SVCs the interface will admit, preventing a burst of UBR (Unspecified Bit Rate) call setup requests from consuming every available VC on the port. For example, setting cwspMaxVcUbr to 300000 (30.0000%) means no more than three-tenths of the interface's VC pool can ever be occupied by UBR (Unspecified Bit Rate) connections at once.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.140.1.2.2.1.1.20
snmpwalk -v2c -c public <target> CISCO-WAN-SVC-MIB::cwspMaxVcUbr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.140.1.2.2.1.1.20.1
snmpget -v2c -c public <target> CISCO-WAN-SVC-MIB::cwspMaxVcUbr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.140.1.2.2.1.1.20.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cwspMaxVcUbr.1

Start monitoring Cisco BPX-SES/MGX ATM switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-SVC-MIB::cwspMaxVcUbr OID value, configure state conditions and alerts, and monitor any Cisco BPX-SES/MGX ATM switch (legacy) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.351.140ciscoWANSvcMIBCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1ciscoWANSvcMIBObjectsCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2ciscoWANSvcPortCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2cwspCacConfigCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2.1cwspCacConfigTableCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2.1.1cwspCacConfigEntryCISCO-WAN-SVC-MIB
1.3.6.1.4.1.351.140.1.2.2.1.1.20cwspMaxVcUbrCISCO-WAN-SVC-MIB