All MIBs › CISCO-WAN-SVC-MIB › cwspIlmiAutoConfEnable
cwspIlmiAutoConfEnable
Module: CISCO-WAN-SVC-MIB
OID (symbolic): CISCO-WAN-SVC-MIB::cwspIlmiAutoConfEnable
OID (numeric): 1.3.6.1.4.1.351.140.1.2.1.1.1.6
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-create
Description: Indicates whether auto-configuration of the interface is turned on or off. If auto-configuration is enabled, then the interface comes up using the ILMI auto-configuration.
What is cwspIlmiAutoConfEnable?
This read-create boolean enables or disables ILMI auto-configuration on this interface; when enabled, the interface comes up using ILMI auto-configuration rather than manual settings. It lets an admin choose between automated ILMI-driven interface bring-up and fully manual configuration. For example, an admin connecting to a UNI device that supports ILMI would enable this so the interface parameters are negotiated automatically instead of being hand-configured.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.140 | ciscoWANSvcMIB | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1 | ciscoWANSvcMIBObjects | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1.2 | ciscoWANSvcPort | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1.2.1 | cwspConfig | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1.2.1.1 | cwspConfigTable | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1.2.1.1.1 | cwspConfigEntry | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1.2.1.1.1.6 | cwspIlmiAutoConfEnable | CISCO-WAN-SVC-MIB |