All MIBs › CISCO-WAN-SVC-MIB › cwspAbrCallBwdAdtf
cwspAbrCallBwdAdtf
Module: CISCO-WAN-SVC-MIB
OID (symbolic): CISCO-WAN-SVC-MIB::cwspAbrCallBwdAdtf
OID (numeric): 1.3.6.1.4.1.351.140.1.2.9.1.1.38
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The Allowed Cell Rate (ACR) Decrease Time Factor for the ABR call in the backward direction. This is the time permitted between sending RM-cells before the rate is decreased to ICR. Range is 10 ms to 10.23 seconds. The unit is 10 msecs. For example, the default value of 50 corresponds to a time factor of 500 ms. Larger values allow a source to retain its current rate longer, during periods of relative inactivity. The default is 50 (0.5 seconds).
What is cwspAbrCallBwdAdtf?
This read-only Integer32 (1..1023), in units of 10 milliseconds, reports the Allowed Cell Rate Decrease Time Factor for the ABR call in the backward direction, the time permitted between RM-cells before the rate is decreased to ICR, with a default of 50 corresponding to 500ms. An administrator uses this to know how long the call's return path can idle before its allowed rate resets to the backward Initial Cell Rate. For example, a return-path source that idles longer than cwspAbrCallBwdAdtf permits has its backward rate reset to cwspAbrCallBwdIcr on resumption.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.140.1.2.9.1.1.38 snmpwalk -v2c -c public <target> CISCO-WAN-SVC-MIB::cwspAbrCallBwdAdtf
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.140.1.2.9.1.1.38.1 snmpget -v2c -c public <target> CISCO-WAN-SVC-MIB::cwspAbrCallBwdAdtf.1
Start monitoring Cisco BPX-SES/MGX ATM switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-SVC-MIB::cwspAbrCallBwdAdtf OID value, configure state conditions and alerts, and monitor any Cisco BPX-SES/MGX ATM switch (legacy) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.140 | ciscoWANSvcMIB | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1 | ciscoWANSvcMIBObjects | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1.2 | ciscoWANSvcPort | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1.2.9 | cwspAbrCall | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1.2.9.1 | cwspAbrCallTable | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1.2.9.1.1 | cwspAbrCallEntry | CISCO-WAN-SVC-MIB |
| 1.3.6.1.4.1.351.140.1.2.9.1.1.38 | cwspAbrCallBwdAdtf | CISCO-WAN-SVC-MIB |