All MIBs › CISCO-WAN-SONET-MIB › cwsPathStatAlarmStatus
cwsPathStatAlarmStatus
Module: CISCO-WAN-SONET-MIB
OID (symbolic): CISCO-WAN-SONET-MIB::cwsPathStatAlarmStatus
OID (numeric): 1.3.6.1.4.1.351.150.3.1.3.1.1.10
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This variable indicates the status of the interface. The cwsPathStatAlarmStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. If none of the bits are set, it indicates no defect. The following ar the bit positions: 1 sonetPathTotalESs 2 sonetPathTotalSESs 3 sonetPathTotalCVs 4 sonetPathTotalUASs 5 sonetPathCurrentESs 6 sonetPathCurrentSESs 7 sonetPathCurrentCVs 8 sonetPathCurrentUASs 9 sonetFarEndPathTotalESs 10 sonetFarEndPathTotalSESs 11 sonetFarEndPathTotalCVs 12 sonetFarEndPathTotalUASs 13 sonetFarEndPathCurrentESs 14 sonetFarEndPathCurrentSESs 15 sonetFarEndPathCurrentCVs 16 sonetFarEndPathCurrentUASs
What is cwsPathStatAlarmStatus?
This read-only bitmap value reports which SONET path performance thresholds are currently exceeded on this interface, with each bit position corresponding to a specific counter such as total errored seconds, severely errored seconds, coding violations, or unavailable seconds, and a value of zero meaning no defect is active. Because multiple bits can be set at once, an admin can see at a glance whether several threshold-crossing conditions are happening simultaneously on the same path rather than polling each counter individually. For example, a NOC dashboard might decode this bitmap to show that both the errored-seconds and unavailable-seconds bits are set, telling the operator the circuit is both noisy and intermittently down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.150.3.1.3.1.1.10 snmpwalk -v2c -c public <target> CISCO-WAN-SONET-MIB::cwsPathStatAlarmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.150.3.1.3.1.1.10.1 snmpget -v2c -c public <target> CISCO-WAN-SONET-MIB::cwsPathStatAlarmStatus.1
Start monitoring Cisco WAN MGX-series SONET/SDH optical switch/multiplexer (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-SONET-MIB::cwsPathStatAlarmStatus OID value, configure state conditions and alerts, and monitor any Cisco WAN MGX-series SONET/SDH optical switch/multiplexer (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.150.3 | ciscoWANSonetMIB | CISCO-WAN-SONET-MIB |
| 1.3.6.1.4.1.351.150.3.1 | ciscoWANSonetMIBObjects | CISCO-WAN-SONET-MIB |
| 1.3.6.1.4.1.351.150.3.1.3 | cwsPath | CISCO-WAN-SONET-MIB |
| 1.3.6.1.4.1.351.150.3.1.3.1 | cwsPathAlarmTable | CISCO-WAN-SONET-MIB |
| 1.3.6.1.4.1.351.150.3.1.3.1.1 | cwsPathAlarmEntry | CISCO-WAN-SONET-MIB |
| 1.3.6.1.4.1.351.150.3.1.3.1.1.10 | cwsPathStatAlarmStatus | CISCO-WAN-SONET-MIB |