All MIBs › CISCO-WAN-CELL-EXT-MIB › cwceLteRsrqOnsetNotifThreshold
cwceLteRsrqOnsetNotifThreshold
Module: CISCO-WAN-CELL-EXT-MIB
OID (symbolic): CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqOnsetNotifThreshold
OID (numeric): 1.3.6.1.4.1.9.9.817.1.1.1.1.1.11
Node type: OBJECT-TYPE
Type: CiscoWanCellExtRsrq
Access: read-write
Description: This object specifies the RSRQ onset threshold value. If the value of cwceLteCurrRsrq goes below the threshold and the service bit in cwceLteRsrqOnsetNotifFlag is set, the cwceLteRsrqOnsetNotif notification for that service will be sent. The absolute value of cwceLteRsrqAbateNotifThreshold should be less than or equal to the absolute value of cwceLteRsrqOnsetNotifThreshold (|cwceLteRsrqAbateNotifThreshold| <= |cwceLteRsrqOnsetNotifThreshold|).
What is cwceLteRsrqOnsetNotifThreshold?
This read-write object sets the RSRQ onset threshold; when the live cwceLteCurrRsrq value drops below it and the corresponding service bit in cwceLteRsrqOnsetNotifFlag is enabled, an onset notification is sent, with the abate threshold's absolute value required to stay less than or equal to this one's. An administrator sets this to define when degraded signal quality, as opposed to raw strength, should trigger an alert. For example, an engineer concerned about interference-driven quality problems would set this threshold to catch RSRQ degradation even when RSRP remains strong.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.11 snmpwalk -v2c -c public <target> CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqOnsetNotifThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.11.1 snmpget -v2c -c public <target> CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqOnsetNotifThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.11.1 s <value>
Start monitoring Cisco IR8xx/IR1101 series industrial routers (4G/LTE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqOnsetNotifThreshold OID value, configure state conditions and alerts, and monitor any Cisco IR8xx/IR1101 series industrial routers (4G/LTE) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.817 | ciscoWanCellExtMIB | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1 | ciscoWanCellExtMIBObjects | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1 | ciscoWanCellExtLte | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1 | cwceLteRadio | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1.1 | cwceLteRadioTable | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1 | cwceLteRadioEntry | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.11 | cwceLteRsrqOnsetNotifThreshold | CISCO-WAN-CELL-EXT-MIB |