CISCO-WAN-CELL-EXT-MIB :: cwceLteRsrqOnsetNotifFlag

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-CELL-EXT-MIBcwceLteRsrqOnsetNotifFlag

cwceLteRsrqOnsetNotifFlag

Module: CISCO-WAN-CELL-EXT-MIB

OID (symbolic): CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqOnsetNotifFlag

OID (numeric): 1.3.6.1.4.1.9.9.817.1.1.1.1.1.15

Node type: OBJECT-TYPE

Type: C3gServiceCapability

Access: read-write

Description: This object specifies the flag bitmap to control the generation of notification cwceLteRsrqOnsetNotif. Each bit represents a service as defined in C3gServiceCapability, set the bit value to 1 to enable (and 0 to disable) the generation of notification cwceLteRsrqOnsetNotif for that service. The default value of this object is all bits are 0. Notifications are not generated in technology modes where RSRQ is not relevant.

What is cwceLteRsrqOnsetNotifFlag?

This read-write bitmap controls which services trigger the cwceLteRsrqOnsetNotif notification, using a per-service bit convention defaulting to all 0, and suppressed in technology modes where RSRQ isn't relevant. An administrator enables specific bits to receive degraded-quality alerts only for the services that matter operationally. For example, an engineer monitoring a critical failover data service would enable this flag's corresponding bit to be alerted when that service's RSRQ degrades.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.15
snmpwalk -v2c -c public <target> CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqOnsetNotifFlag

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.15.1
snmpget -v2c -c public <target> CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqOnsetNotifFlag.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.15.1 s <value>

Start monitoring Cisco IR8xx/IR1101 series industrial routers (4G/LTE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqOnsetNotifFlag OID value, configure state conditions and alerts, and monitor any Cisco IR8xx/IR1101 series industrial routers (4G/LTE) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.817ciscoWanCellExtMIBCISCO-WAN-CELL-EXT-MIB
1.3.6.1.4.1.9.9.817.1ciscoWanCellExtMIBObjectsCISCO-WAN-CELL-EXT-MIB
1.3.6.1.4.1.9.9.817.1.1ciscoWanCellExtLteCISCO-WAN-CELL-EXT-MIB
1.3.6.1.4.1.9.9.817.1.1.1cwceLteRadioCISCO-WAN-CELL-EXT-MIB
1.3.6.1.4.1.9.9.817.1.1.1.1cwceLteRadioTableCISCO-WAN-CELL-EXT-MIB
1.3.6.1.4.1.9.9.817.1.1.1.1.1cwceLteRadioEntryCISCO-WAN-CELL-EXT-MIB
1.3.6.1.4.1.9.9.817.1.1.1.1.1.15cwceLteRsrqOnsetNotifFlagCISCO-WAN-CELL-EXT-MIB