All MIBs › CISCO-WAN-CELL-EXT-MIB › cwceLteRsrqAbateNotifThreshold
cwceLteRsrqAbateNotifThreshold
Module: CISCO-WAN-CELL-EXT-MIB
OID (symbolic): CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqAbateNotifThreshold
OID (numeric): 1.3.6.1.4.1.9.9.817.1.1.1.1.1.12
Node type: OBJECT-TYPE
Type: CiscoWanCellExtRsrq
Access: read-write
Description: This object specifies the RSRQ abate threshold value. If the value of cwceLteCurrRsrq goes above the threshold and the service bit in cwceLteRsrqOnsetNotifFlag is set, the cwceLteRsrqAbateNotif notification for that service will be sent. The absolute value of cwceLteRsrqAbateNotifThreshold should be less than or equal to the absolute value of cwceLteRsrqOnsetNotifThreshold (|cwceLteRsrqAbateNotifThreshold| <= |cwceLteRsrqOnsetNotifThreshold|).
What is cwceLteRsrqAbateNotifThreshold?
This read-write object sets the RSRQ abate threshold; when the live cwceLteCurrRsrq value rises back above it and the corresponding service bit is enabled, an abate notification is sent, with its absolute value required to stay less than or equal to the onset threshold's absolute value. An administrator sets this to define the quality-recovery point that clears a previously fired RSRQ alert. For example, this threshold combined with the onset threshold creates a hysteresis band so quality alerts don't flap on small fluctuations.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.12 snmpwalk -v2c -c public <target> CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqAbateNotifThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.12.1 snmpget -v2c -c public <target> CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqAbateNotifThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.12.1 s <value>
Start monitoring Cisco IR8xx/IR1101 series industrial routers (4G/LTE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqAbateNotifThreshold OID value, configure state conditions and alerts, and monitor any Cisco IR8xx/IR1101 series industrial routers (4G/LTE) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.817 | ciscoWanCellExtMIB | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1 | ciscoWanCellExtMIBObjects | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1 | ciscoWanCellExtLte | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1 | cwceLteRadio | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1.1 | cwceLteRadioTable | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1 | cwceLteRadioEntry | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.12 | cwceLteRsrqAbateNotifThreshold | CISCO-WAN-CELL-EXT-MIB |