CISCO-WAN-CELL-EXT-MIB :: cwceLteRsrqAbateNotifFlag

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-CELL-EXT-MIBcwceLteRsrqAbateNotifFlag

cwceLteRsrqAbateNotifFlag

Module: CISCO-WAN-CELL-EXT-MIB

OID (symbolic): CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqAbateNotifFlag

OID (numeric): 1.3.6.1.4.1.9.9.817.1.1.1.1.1.16

Node type: OBJECT-TYPE

Type: C3gServiceCapability

Access: read-write

Description: This object specifies the flag bitmap to control the generation of notification cwceLteRsrqAbateNotif. Each bit represents a service as defined in C3gServiceCapability, set the bit value to 1 to enable (and 0 to disable) the generation of notification cwceLteRsrqAbateNotif for that service. The default value of this object is all bits are 0. Notifications are not generated in technology modes where RSRQ is not relevant.

What is cwceLteRsrqAbateNotifFlag?

This read-write bitmap controls which services trigger the cwceLteRsrqAbateNotif notification, using a per-service bit convention defaulting to all 0, and suppressed in technology modes where RSRQ isn't relevant. An administrator uses it to be notified when a previously degraded connection's quality has recovered above the abate threshold. For example, enabling this flag alongside the onset flag for the same service gives a complete open/close alert cycle for RSRQ quality events.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.16
snmpwalk -v2c -c public <target> CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqAbateNotifFlag

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.16.1
snmpget -v2c -c public <target> CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqAbateNotifFlag.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.16.1 s <value>

Start monitoring Cisco IR8xx/IR1101 series industrial routers (4G/LTE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-CELL-EXT-MIB::cwceLteRsrqAbateNotifFlag OID value, configure state conditions and alerts, and monitor any Cisco IR8xx/IR1101 series industrial routers (4G/LTE) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.817ciscoWanCellExtMIBCISCO-WAN-CELL-EXT-MIB
1.3.6.1.4.1.9.9.817.1ciscoWanCellExtMIBObjectsCISCO-WAN-CELL-EXT-MIB
1.3.6.1.4.1.9.9.817.1.1ciscoWanCellExtLteCISCO-WAN-CELL-EXT-MIB
1.3.6.1.4.1.9.9.817.1.1.1cwceLteRadioCISCO-WAN-CELL-EXT-MIB
1.3.6.1.4.1.9.9.817.1.1.1.1cwceLteRadioTableCISCO-WAN-CELL-EXT-MIB
1.3.6.1.4.1.9.9.817.1.1.1.1.1cwceLteRadioEntryCISCO-WAN-CELL-EXT-MIB
1.3.6.1.4.1.9.9.817.1.1.1.1.1.16cwceLteRsrqAbateNotifFlagCISCO-WAN-CELL-EXT-MIB