All MIBs › CISCO-WAN-CELL-EXT-MIB › cwceLteRsrpOnsetNotifThreshold
cwceLteRsrpOnsetNotifThreshold
Module: CISCO-WAN-CELL-EXT-MIB
OID (symbolic): CISCO-WAN-CELL-EXT-MIB::cwceLteRsrpOnsetNotifThreshold
OID (numeric): 1.3.6.1.4.1.9.9.817.1.1.1.1.1.9
Node type: OBJECT-TYPE
Type: CiscoWanCellExtRsrp
Access: read-write
Description: This object specifies the RSRP onset threshold value. If the value of cwceLteCurrRsrp goes below the threshold and the service bit in cwceLteRsrpOnsetNotifFlag is set, the cwceLteRsrqOnsetNotif notification for that service will be sent. The absolute value of cwceLteRsrpAbateNotifThreshold should be less than or equal to the absolute value of cwceLteRsrpOnsetNotifThreshold (|cwceLteRsrpAbateNotifThreshold| <= |cwceLteRsrpOnsetNotifThreshold|).
What is cwceLteRsrpOnsetNotifThreshold?
This read-write object sets the RSRP onset threshold; when the live cwceLteCurrRsrp value drops below this threshold and the corresponding service bit in cwceLteRsrpOnsetNotifFlag is enabled, an onset notification is sent, and the MIB notes the abate threshold's absolute value must stay less than or equal to this onset threshold's absolute value. An administrator sets this to define what counts as a weak-signal condition worth alerting on. For example, setting this threshold to -110 dBm would trigger an alert as soon as signal strength weakens past that point.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.9 snmpwalk -v2c -c public <target> CISCO-WAN-CELL-EXT-MIB::cwceLteRsrpOnsetNotifThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.9.1 snmpget -v2c -c public <target> CISCO-WAN-CELL-EXT-MIB::cwceLteRsrpOnsetNotifThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.9.1 s <value>
Start monitoring Cisco IR8xx/IR1101 series industrial routers (4G/LTE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-CELL-EXT-MIB::cwceLteRsrpOnsetNotifThreshold OID value, configure state conditions and alerts, and monitor any Cisco IR8xx/IR1101 series industrial routers (4G/LTE) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.817 | ciscoWanCellExtMIB | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1 | ciscoWanCellExtMIBObjects | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1 | ciscoWanCellExtLte | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1 | cwceLteRadio | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1.1 | cwceLteRadioTable | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1 | cwceLteRadioEntry | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.9 | cwceLteRsrpOnsetNotifThreshold | CISCO-WAN-CELL-EXT-MIB |