All MIBs › CISCO-WAN-CELL-EXT-MIB › cwceLteRsrpAbateNotifThreshold
cwceLteRsrpAbateNotifThreshold
Module: CISCO-WAN-CELL-EXT-MIB
OID (symbolic): CISCO-WAN-CELL-EXT-MIB::cwceLteRsrpAbateNotifThreshold
OID (numeric): 1.3.6.1.4.1.9.9.817.1.1.1.1.1.10
Node type: OBJECT-TYPE
Type: CiscoWanCellExtRsrp
Access: read-write
Description: This object specifies the RSRP abate threshold value. If the value of cwceLteCurrRsrp goes above the threshold and the service bit in cwceLteRsrpOnsetNotifFlag is set, the cwceLteRsrpAbateNotif notification for that service will be sent. The absolute value of cwceLteRsrpAbateNotifThreshold should be less than or equal to the absolute value of cwceLteRsrpOnsetNotifThreshold (|cwceLteRsrpAbateNotifThreshold| <= |cwceLteRsrpOnsetNotifThreshold|).
What is cwceLteRsrpAbateNotifThreshold?
This read-write object sets the RSRP abate threshold; when the live cwceLteCurrRsrp value rises back above this threshold and the corresponding service bit is enabled, an abate notification is sent, and its absolute value must stay less than or equal to the onset threshold's absolute value. An administrator sets this to define the recovery point after a weak-signal alert has fired. For example, pairing an onset threshold of -110 dBm with an abate threshold of -100 dBm creates hysteresis so the alert doesn't flap right at the boundary.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.10 snmpwalk -v2c -c public <target> CISCO-WAN-CELL-EXT-MIB::cwceLteRsrpAbateNotifThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.10.1 snmpget -v2c -c public <target> CISCO-WAN-CELL-EXT-MIB::cwceLteRsrpAbateNotifThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.817.1.1.1.1.1.10.1 s <value>
Start monitoring Cisco IR8xx/IR1101 series industrial routers (4G/LTE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-CELL-EXT-MIB::cwceLteRsrpAbateNotifThreshold OID value, configure state conditions and alerts, and monitor any Cisco IR8xx/IR1101 series industrial routers (4G/LTE) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.817 | ciscoWanCellExtMIB | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1 | ciscoWanCellExtMIBObjects | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1 | ciscoWanCellExtLte | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1 | cwceLteRadio | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1.1 | cwceLteRadioTable | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1 | cwceLteRadioEntry | CISCO-WAN-CELL-EXT-MIB |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.10 | cwceLteRsrpAbateNotifThreshold | CISCO-WAN-CELL-EXT-MIB |