CISCO-WAN-AXIPOP-MIB :: vismRtcpRecvMultiplier

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-AXIPOP-MIBvismRtcpRecvMultiplier

vismRtcpRecvMultiplier

Module: CISCO-WAN-AXIPOP-MIB

OID (symbolic): CISCO-WAN-AXIPOP-MIB::vismRtcpRecvMultiplier

OID (numeric): 1.3.6.1.4.1.351.110.3.17.2.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The 'vismRtcpRepInterval' MIB object specified above defines an approximate RTCP report interval (defined in RFC 1889) which indicates the interval in milliseconds at which the RTCP reports should be sent to the participating members.

This MIB object, 'vismRtcpRecvMultiplier', defines how many times the RTCP reports may fail before exception condition activity may be done. At this number of times specified in this MIB object times the RTCP Report Interval, a check is made on a VoIP connection (which is in SENDRECV or RECVONLY xGCP modes) to see if any RTP packets have been received. If not, gateway-initiated DLCX should be sent to the Call Agent.

Currently, this interval multiplier is a card-specific value, which means the value is configurable on a per card basis and not on a per call basis.

This value is applicable for VoIP adaptation only.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.2.14
snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::vismRtcpRecvMultiplier

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.2.14.1
snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::vismRtcpRecvMultiplier.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.3.17.2.14.1 i <value>

Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::vismRtcpRecvMultiplier OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.3cardSpecificBASIS-MIB
1.3.6.1.4.1.351.110.3.17vismConfigCISCO-VISM-MODULE-MIB
1.3.6.1.4.1.351.110.3.17.2vismVoIpGrpCISCO-VISM-MODULE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.3.17.2.14vismRtcpRecvMultiplierCISCO-WAN-AXIPOP-MIB