All MIBs › CISCO-WAN-AXIPOP-MIB › vismFarEndE164Address
vismFarEndE164Address
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::vismFarEndE164Address
OID (numeric): 1.3.6.1.4.1.351.110.5.5.3.1.1.1.42
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: The E.164 address of the far end peer. The address is expressed as decimal numbers with up to 15 digits. If the vismFarEndAddressType is different from e164, this object is not applicable and it should be ignored.
This object serves as the scope for VCCI identifiers (vismVCCI) if vismFarEndAddressType is equal to e164. In that case, the combination of (vismFarEndE164Address, vismVCCI) will always be unique for any given agent. It thus constitutes a label denoting the scope for a VCCI address space; it has no purpose otherwise.
While this object is writeable, it is recommended not to change the value of this object once it has been created. However, upon modification, it will be ensured that the resulting combination of VCCI and remote E164 address is unique (as long as the remote address type is E164). Requests that would result in a non-unique combination will be rejected. Beyond this, there are no other integrity constraints that will be enforced for this object. This includes network-level consistency with the actual address of the remote peer.
The value of this object cannot be modified when there are active calls on this PVC. The valid characters allowed are '0..9'.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.1.1.1.42 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::vismFarEndE164Address
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.1.1.1.42.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::vismFarEndE164Address.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.5.3.1.1.1.42.1 s <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::vismFarEndE164Address OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5 | voice | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5.3 | vismChanGrp | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5.3.1 | vismChanCnfGrp | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5.3.1.1 | vismChanCnfGrpTable | CISCO-VISM-CONN-MIB |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1 | vismChanCnfGrpEntry | CISCO-VISM-CONN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.42 | vismFarEndE164Address | CISCO-WAN-AXIPOP-MIB |