All MIBs › CISCO-WAN-AXIPOP-MIB › vismFarEndAddressType
vismFarEndAddressType
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::vismFarEndAddressType
OID (numeric): 1.3.6.1.4.1.351.110.5.5.3.1.1.1.41
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The address type can be one of five types: NSAP, E164, GWID, notapplicable or unspecified. It determines which object contains the scope for the VCCI, i.e. whether the VCCI needs to be unique relative to NSAP, E164 address or GWID. In case of nsap, object vismFarEndNSAPAddress contains the address. In case of e164, object vismFarEndE164Address contains the address. In case of gwid, object vismFarEndGWIDAddress contains the address. In case this object is set to notapplicable, no valid addresses are required and no validation of VCCI uniqueness for a remote address is performed. In case this object is set to unspecified, no valid addresses are required but VCCI needs to be unique.
While this object is writeable, it is recommended not to change the value of this object once it has been created. However, upon modification to any value other than notapplicable, it will be ensured that the resulting combination of VCCI and remote address is unique. Requests that would result in a non-unique combination will be rejected.
If the vismFarEndAddressType is one of nsap, e164 or gwid, the far end address has to be specified.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.1.1.1.41 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::vismFarEndAddressType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.1.1.1.41.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::vismFarEndAddressType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.5.3.1.1.1.41.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::vismFarEndAddressType OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5 | voice | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5.3 | vismChanGrp | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5.3.1 | vismChanCnfGrp | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5.3.1.1 | vismChanCnfGrpTable | CISCO-VISM-CONN-MIB |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1 | vismChanCnfGrpEntry | CISCO-VISM-CONN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.41 | vismFarEndAddressType | CISCO-WAN-AXIPOP-MIB |