All MIBs › CISCO-WAN-AXIPOP-MIB › vismConnPCR
vismConnPCR
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::vismConnPCR
OID (numeric): 1.3.6.1.4.1.351.110.5.5.3.1.1.1.22
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This indicates bandwidth(Peak Cell Rate) in cells per second from the local end i.e in the ingress direction of the PVC. For a VoIP bearer PVC, the max value is 75600 cps. For a VoIP control PVC, the max value is 24400 cps.
For AAL2 PVCs, the PCR to be specified has to be computed based on: a) The no. of channels multiplexed on an AAL2 PVC b) The Codec (Compression Algorithm) used. c) The VAD factor d) Partial fill factor.
For a AAL2 bearer PVC, the max value is 60,000 cps on E1 card and 50,000 cps on T1 card. For a signaling PVC, the max value is 400 cps.
This is a mandatory parameter when adding a PVC. Hence a default value is not applicable. This parameter can not be changed when there are calls active on the PVC.
From Indiana release onwards For a VOIP bearer PVC the max allowed value is 80000 For a VOIP control PVC the max allowed value is 20000 increased as we will allow 248 endpoints.
For Aal2 the values remain the same 50000/60000.
For vbr connections the minimum value of PCR is 15.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.1.1.1.22 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::vismConnPCR
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.1.1.1.22.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::vismConnPCR.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.5.3.1.1.1.22.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::vismConnPCR OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5 | voice | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5.3 | vismChanGrp | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5.3.1 | vismChanCnfGrp | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5.3.1.1 | vismChanCnfGrpTable | CISCO-VISM-CONN-MIB |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1 | vismChanCnfGrpEntry | CISCO-VISM-CONN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.22 | vismConnPCR | CISCO-WAN-AXIPOP-MIB |