CISCO-WAN-AXIPOP-MIB :: vismBearerContinuityTest

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-AXIPOP-MIBvismBearerContinuityTest

vismBearerContinuityTest

Module: CISCO-WAN-AXIPOP-MIB

OID (symbolic): CISCO-WAN-AXIPOP-MIB::vismBearerContinuityTest

OID (numeric): 1.3.6.1.4.1.351.110.3.17.4.26

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This attribute defines whether the bearer continuity test for a connection will be performed at the time of call setup or not.

When the vismBearerContinuityTest is enabled, the terminating media Gateway initiates a NSE/type 3 packet towards the originating gateway and starts a timer defined by vismBearerContinuityTimer.

The originating gateway, on receipt of co3, responds by sending a co4 to the terminating end.

If the terminating gateway doesn't receive co4 NSE/type 3 packet with in the time defined by co4 timer, it initiates a GW-initiated DLCX to the call agent which in turn deletes the connection.

The value in this object will be utilised when the Call Agent does not specify this.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.26
snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::vismBearerContinuityTest

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.26.1
snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::vismBearerContinuityTest.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.3.17.4.26.1 s <value>

Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::vismBearerContinuityTest OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.3cardSpecificBASIS-MIB
1.3.6.1.4.1.351.110.3.17vismConfigCISCO-VISM-MODULE-MIB
1.3.6.1.4.1.351.110.3.17.4vismSystemGrpCISCO-VISM-MODULE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.3.17.4.26vismBearerContinuityTestCISCO-WAN-AXIPOP-MIB