All MIBs › CISCO-WAN-AXIPOP-MIB › vismAvailableDs0Count
vismAvailableDs0Count
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::vismAvailableDs0Count
OID (numeric): 1.3.6.1.4.1.351.110.3.17.4.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This attribute describes the no. of DS0s available for new connections on VISM. This is modified by the VISM firmware after each connection is setup. In indiana release the number of connections has been increased to 248, as the number of endpoints supported has been increased.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.8 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::vismAvailableDs0Count
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.8.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::vismAvailableDs0Count.1
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::vismAvailableDs0Count OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.3 | cardSpecific | BASIS-MIB |
| 1.3.6.1.4.1.351.110.3.17 | vismConfig | CISCO-VISM-MODULE-MIB |
| 1.3.6.1.4.1.351.110.3.17.4 | vismSystemGrp | CISCO-VISM-MODULE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.3.17.4.8 | vismAvailableDs0Count | CISCO-WAN-AXIPOP-MIB |