All MIBs › CISCO-WAN-AXIPOP-MIB › serialLineRate
serialLineRate
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::serialLineRate
OID (numeric): 1.3.6.1.4.1.351.110.4.5.1.1.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: line rate for X.21/HSSI/V.35 interfaces in bps. This object is supported only by FRSM-HS2/B card, only multiples of 1000 are accepted.
Default is 48Kbps for X.21/V.35 interfaces and 51840Kbps for HSSI interface
What is serialLineRate?
This read-write object, ranging from 48000 to 51840000, sets the line rate in bits per second for X.21/HSSI/V.35 interfaces, accepting only multiples of 1000, and is supported only on the FRSM-HS2/B card, with defaults of 48 Kbps for X.21/V.35 and 51,840 Kbps for HSSI. An administrator sets this to precisely match the provisioned circuit speed on supported hardware. For example, provisioning an HSSI interface at its default full rate would leave this object at 51,840,000 bps, while a slower X.21 link might be set down near the 48,000 bps default.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.5.1.1.1.12 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::serialLineRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.5.1.1.1.12.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::serialLineRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.5.1.1.1.12.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> serialLineRate.1
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::serialLineRate OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.5 | x21 | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.5.1 | x21CnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.4.5.1.1 | x21CnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.4.5.1.1.1 | x21CnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.4.5.1.1.1.12 | serialLineRate | CISCO-WAN-AXIPOP-MIB |