All MIBs › CISCO-WAN-AXIPOP-MIB › qir
qir
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::qir
OID (numeric): 1.3.6.1.4.1.351.110.5.1.2.1.1.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The dafault is 160 qir is defined in fastpackets/sec and it defines quiescent information rate for Foresight. 1 cell/sec is equal to 16 fastpackets/sec. Following information about cps is for reference only: The peak value for qir in FRSM-VHS cards is 285714 cps and for all other cards, it is 10000 cps. For FRSM-VHS cards, cell will be the ATM cell (48 byte payload).
For FRSM12 Card: Not Supported
What is qir?
This read-write integer sets the Quiescent Information Rate (qir) in fastpackets per second for ForeSight rate control, defaulting to 160, where 1 cell/sec equals 16 fastpackets/sec, with a peak of 285,714 cps on FRSM-VHS cards versus 10,000 cps on other cards; it is not supported on FRSM12. An administrator sets qir to define the baseline sending rate a ForeSight-controlled source falls back to when the connection is idle or quiescent. For example, on an FRSM-VHS card an engineer could configure a qir corresponding to close to the 285,714 cps ceiling, far beyond what a non-VHS card's 10,000 cps limit would allow.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.18 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::qir
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.18.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::qir.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.18.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::qir OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1 | frameRelay | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1.2 | frChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.1.2.1 | frChanCnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1 | frChanCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1.1 | frChanCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1.1.18 | qir | CISCO-WAN-AXIPOP-MIB |