All MIBs › CISCO-WAN-AXIPOP-MIB › portDs0Speed
portDs0Speed
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::portDs0Speed
OID (numeric): 1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This represents port speed of 64 or 56 1 - speed56k 2 - speed64k 3 - unUsed. This field is not used for unchannelised FRSM-VHS (FRSM-2T3/ FRSM-2E3/FRSM-HS2/FRSM-T3B/FRSM-E3B/FRSM-HS2B) cards; in such cards, the portDs0Speed field carries a value of 'unUsed' always. For FRSM12 card: This is set to 3 - unUsed.
What is portDs0Speed?
This read-write enumeration (speed56k(1), speed64k(2), unUsed(3)) sets the per-DS0 port speed to either 56k or 64k; it does not apply to unchannelized FRSM-VHS-family cards (which always report unUsed), and on FRSM12 it is always set to unUsed. An administrator configures speed56k or speed64k on channelized cards to match the actual DS0 clocking used by the connected equipment. For example, on a channelized FRSM-8T1/E1 port carrying legacy 56k-clocked circuits, portDs0Speed would be set to speed56k(1) rather than left at the higher 64k rate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.5 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::portDs0Speed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.5.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::portDs0Speed.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> portDs0Speed.1
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::portDs0Speed OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1 | frameRelay | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1.1 | frPort | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1.1.1 | frPortCnf | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.1.1.1.1 | frPortCnfPortGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.1.1.1.1 | frPortCnfPortGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.1.1.1.1.1 | frPortCnfPortGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.5 | portDs0Speed | CISCO-WAN-AXIPOP-MIB |