All MIBs › CISCO-WAN-AXIPOP-MIB › pir
pir
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::pir
OID (numeric): 1.3.6.1.4.1.351.110.5.1.2.1.1.1.20
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The dafault is 160 pir is defined in fastpackets/sec and it defines peak information rate for Foresight. 1 cell/sec is equal to 16 fastpackets/sec. Following information about cps is for reference only: The peak value for qir in FRSM-VHS cards is 285714 cps and for all other cards, it is 10000 cps. For FRSM-VHS cards, cell will be the ATM cell (48 byte payload).
For FRSM12 Card: Not Supported
What is pir?
This read-write integer sets the Peak Information Rate (pir) in fastpackets per second for ForeSight rate control, defaulting to 160, sharing the 16 fastpackets-per-cell conversion and the 285,714 cps (FRSM-VHS) versus 10,000 cps (other cards) peak; it is not supported on FRSM12. An administrator sets pir as the ceiling ForeSight allows a source to burst up to when bandwidth is available, working alongside qir and mir to shape the connection's rate envelope. For example, on a card other than FRSM-VHS, pir cannot be pushed past 10,000 cps even if the connection's cir would otherwise justify a higher peak.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.20 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::pir
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.20.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::pir.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.20.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::pir OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1 | frameRelay | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1.2 | frChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.1.2.1 | frChanCnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1 | frChanCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1.1 | frChanCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1.1.20 | pir | CISCO-WAN-AXIPOP-MIB |