All MIBs › CISCO-WAN-AXIPOP-MIB › parConnAdminStatus
parConnAdminStatus
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::parConnAdminStatus
OID (numeric): 1.3.6.1.4.1.351.130.3.1.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used by the operator to reroute or down/up a connection. The value of this object is up when the connection is created. If the value of the object is set to down(1) the connection is derouted (if it is routed) and parConnOperStatus object is set to not routed. If the value of the object is up (2) and it is set to reroute(3) the connection is derouted and attempt is made to reroute the connection. If the value of the object is down (1) and the it is set to reroute (3), no action is performed and the object's value does not changes. If the value of object is down(1) and is set to up(2), an attempt is made to reroute the connection.
What is parConnAdminStatus?
This read-write INTEGER, valued down(1), up(2), or reroute(3), lets the operator manually derail, restore, or force a reroute of a connection. A connection starts at up(2) when created; setting it to down(1) deroutes the connection (if routed) and sets parConnOperStatus to not-routed, while setting it to reroute(3) deroutes and attempts to find a new path. For example, an administrator troubleshooting a PVC stuck on a bad path would set parConnAdminStatus to reroute(3) to force PAR to search for an alternate route.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.130.3.1.1.15 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::parConnAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.130.3.1.1.15.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::parConnAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.130.3.1.1.15.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::parConnAdminStatus OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.130 | par | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.130.3 | parConnection | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.130.3.1 | parConnectionTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.130.3.1.1 | parConnectionEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.130.3.1.1.15 | parConnAdminStatus | CISCO-WAN-AXIPOP-MIB |