CISCO-WAN-AXIPOP-MIB :: mir

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-AXIPOP-MIBmir

mir

Module: CISCO-WAN-AXIPOP-MIB

OID (symbolic): CISCO-WAN-AXIPOP-MIB::mir

OID (numeric): 1.3.6.1.4.1.351.110.5.1.2.1.1.1.19

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The dafault is 160 mir is defined in fastpackets/sec and it defines minimum information rate for Foresight. 1 cell/sec is equal to 16 fastpackets/sec. Following information about cps is for reference only: The peak value for qir in FRSM-VHS cards is 285714 cps and for all other cards, it is 10000 cps. For FRSM-VHS cards, cell will be the ATM cell (48 byte payload).

For FRSM12 Card: Not Supported

What is mir?

This read-write integer sets the Minimum Information Rate (mir) in fastpackets per second for ForeSight rate control, defaulting to 160, with the same 16 fastpackets-per-cell conversion and the same 285,714 cps (FRSM-VHS) versus 10,000 cps (other cards) peak; it is not supported on FRSM12. An administrator configures mir as the floor rate ForeSight will never throttle a source below, guaranteeing a minimum throughput even under congestion. For example, raising mir on a ForeSight-enabled connection ensures the source keeps sending at least that fastpacket rate even when qir-level backoff would otherwise apply.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.19
snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::mir

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.19.1
snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::mir.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.19.1 i <value>

Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::mir OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.5basisServicesBASIS-MIB
1.3.6.1.4.1.351.110.5.1frameRelayBASIS-MIB
1.3.6.1.4.1.351.110.5.1.2frChanBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.5.1.2.1frChanCnfGrpCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.1.2.1.1frChanCnfGrpTableCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.1.2.1.1.1frChanCnfGrpEntryCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.1.2.1.1.1.19mirCISCO-WAN-AXIPOP-MIB