All MIBs › CISCO-WAN-AXIPOP-MIB › frstdABRcnfChanNum
frstdABRcnfChanNum
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::frstdABRcnfChanNum
OID (numeric): 1.3.6.1.4.1.351.110.5.1.2.1.3.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Refers to the virtual connection index Note that the actual range of the index supported by a card depends on the type of card. eg: FRSM-4T1/E1 supports a range from 16..271 (256 entries) FRSM-8T1/E1 supports a range from 16..1015 (1000 entries) FRSM-T3/E3/HS2/T3B/E3B/HS2B-HSSI supports a range from 16..2015 (2000 entries) FRSM-2CT3/HS2B-12IN1 supports a range from 16..4015 (4000 entries) For FRSM12 Card: Byte 3 = Chassis Number, Byte 2 = Slot Number, Byte 1 & 0 = channel Number. Lower two bytes range from 16..16015 (16000 entries)
What is frstdABRcnfChanNum?
This read-only integer is the virtual connection index for a standard-ABR connection, whose actual supported range depends on card type: 16-271 (256 entries) on FRSM-4T1/E1, 16-1015 (1000 entries) on FRSM-8T1/E1, 16-2015 (2000 entries) on FRSM-T3/E3/HS2 family cards, and 16-4015 (4000 entries) on FRSM-2CT3/HS2B-12IN1 cards, while FRSM12 encodes chassis and slot number into separate bytes. An administrator reads this to identify which specific standard-ABR connection a set of ABR parameter rows (Nrm, Trm, ICR, and so on) belongs to. For example, on an FRSM-8T1/E1 card frstdABRcnfChanNum could range as high as 1015, whereas the same connection index on an FRSM-4T1/E1 card would be limited to a maximum of 271.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.3.1.1 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::frstdABRcnfChanNum
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.3.1.1.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::frstdABRcnfChanNum.1
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::frstdABRcnfChanNum OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1 | frameRelay | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1.2 | frChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.1.2.1 | frChanCnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.3 | frstdABRCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.3.1 | frstdABRCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.3.1.1 | frstdABRcnfChanNum | CISCO-WAN-AXIPOP-MIB |