All MIBs › CISCO-WAN-AXIPOP-MIB › frConnForeSightEnable
frConnForeSightEnable
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::frConnForeSightEnable
OID (numeric): 1.3.6.1.4.1.351.110.5.1.2.1.1.1.53
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used by the controller(PAR/PNNI/TAG) to set up the Qbin for the connection, if this is not set, it'll be defaulted by SM to the same as foreSightEnable in the end point parameters.
For FRSM12 Card: Not Supported
What is frConnForeSightEnable?
This read-write enumeration (enable(1), disable(2)) is used by the controller (PAR, PNNI, or TAG) to configure ForeSight rate control (the Qbin) for this specific connection; if left unset it defaults to the endpoint-level foreSightEnable value, and it is not supported on FRSM12. An administrator overrides this per-connection when a specific connection needs different ForeSight behavior than the general endpoint default. For example, if the endpoint-level foreSightEnable is set to enable but one particular connection should not use ForeSight, frConnForeSightEnable can be explicitly set to disable for that connection alone.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.53 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::frConnForeSightEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.53.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::frConnForeSightEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.53.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::frConnForeSightEnable OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1 | frameRelay | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.1.2 | frChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.1.2.1 | frChanCnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1 | frChanCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1.1 | frChanCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.1.2.1.1.1.53 | frConnForeSightEnable | CISCO-WAN-AXIPOP-MIB |